Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help needed to resolve the issue im facing with Modified wilsoncurrent Mirror circuit

Status
Not open for further replies.
V

Venkatlab

Junior Member level 1
Junior Member level 1
Joined
Feb 5, 2009
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,378
Hi All,

I have made a current mirror circuit as attached below with Rin as 5K,Vin =15Vdc

CM.png.

Vo = 24 to150Vdc.

IRef=(15-Vgs)/(5K+RDS)

As per my calc IRef=2.2mA Approx.

I assume the same current should mirrored in Iout irrespective of the voltage given @ Vo.

Mosfet Used: Si7956Dp (Dual N-channel MOSFET in a single package)

But i see a large variation in current Iout.

Can someone guide me to resolve this issue,

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top