Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help needed to identify the core.

Status
Not open for further replies.
liteon

liteon

Full Member level 2
Full Member level 2
Joined
Oct 13, 2010
Messages
149
Helped
27
Reputation
54
Reaction score
27
Trophy points
1,308
Location
PAKISTAN
Activity points
2,510
Can any body please help me to identify this type of ferrite core.the dimensions are given in the pictures.IT looks like EE series core but the center leg is round.The core is from an ATX power supply.Is it good to use in dc to ac inveters?
 

Attachments

  • fb2.jpg
    fb2.jpg
    76.6 KB · Views: 85
  • fb1.jpg
    fb1.jpg
    84.2 KB · Views: 89

"Is it good to use in dc to ac inverters?"

They sure are:wink:
 
  • Like
Reactions: liteon

    liteon

    liteon

    Points: 2
    Helpful Answer Positive Rating
What exaclty is the EE type for this core? Does the round center leg make no difference compared to square leg as found in common EE types?
 

ER 35/21/11, refer to datasheets of major manufacturers, e.g. Ferroxcube, Epcos et al.
 
  • Like
Reactions: liteon

    liteon

    liteon

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top