manoj madhavan
Banned
- Joined
- May 1, 2010
- Messages
- 119
- Helped
- 5
- Reputation
- 10
- Reaction score
- 5
- Trophy points
- 1,308
- Location
- India, Kerala, Moolamattom
- Activity points
- 0
I have a proteus stepper simulation...... Simulation was OK.... But practical is not working...
please take a look at the attachment..
It has Forward, Reverse and Stop function...... connected to the P3.0, P3.1 and P3.2 also...
The out put was P0.0 for Forward, P0.1 for Reverse and P0.2 for Stop...
Reverse and stop function are okey...But no change when I press the Forward switch P3.0 connected via K1.
I am so worried about my project
Can you help me any one please..?
Thanks in advance
please take a look at the attachment..
It has Forward, Reverse and Stop function...... connected to the P3.0, P3.1 and P3.2 also...
The out put was P0.0 for Forward, P0.1 for Reverse and P0.2 for Stop...
Reverse and stop function are okey...But no change when I press the Forward switch P3.0 connected via K1.
I am so worried about my project
Can you help me any one please..?
Thanks in advance