Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help needed in Can driver in linux device driver programming

Status
Not open for further replies.
R

rangerskm

Full Member level 4
Full Member level 4
Joined
Jan 23, 2013
Messages
199
Helped
0
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
2,663
Hi friends,

i need to write a driver for can module in linux .i need to know about the can interfacing module to attach in pc and write driver for that.

please guide me about the module to buy
 

.i need to know about the can interfacing module to attach in pc and write driver for that.
Click to expand...
If you get the module,to attach in your PC,everything will be pre loaded and you will not need to write driver code for it.If you want create a driver on Raspberry Pi/Beaglebone black and attach that to the PC....that might work out.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top