Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help need on debug this SimuLink Model

Status
Not open for further replies.
M

mike_bihan

Full Member level 3
Full Member level 3
Joined
Mar 21, 2002
Messages
182
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
1,531
This model keep telling me some issue on signal dimension.

There is a loop in the model, if i specify one Sample/Hold to be "input latched", the issue will appear. If i specify it not so, it will be OK.

I've uploaded model hope someone can help me debug it.

Many thanks;
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top