Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me with a reference of 450M CDMA PA using LDMOS

Status
Not open for further replies.

Radio

Newbie level 6
Newbie level 6
Joined
Dec 6, 2001
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
7
450M CDMA PA Using LDMOS

Recently, when I designed 450M CDMA PA, 30W/1 Carrier, I want to use 28V LDMOS as the power device.

The driver is AGRA10E 10W/100M~1G from Agere systems.Great devices.
But The final stage is AGR09130 which is in general used in 900M, but Agere didnt provide corresponding reference covering 450M. What can I do?
Anyone give me some recommendation, thanks
If someone have the same design using Moto's devices, i would like to here from you.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top