Help me translate C command to Pascal command

[Foldesa]

Help translate C command

Hi !

I need your help. My problem is I can't translate

if (i) temp_whole |= res_factor_3[res_shift - 1];

C command to pascal command.
Can anybody help?

Thank you

András

 

[pic16f876]

Re: Help translate C command

Needs at least variables declaration to be understood.
please send all the sub/function code...

 

[C-Man]

Re: Help translate C command

Hi !

I need your help. My problem is I can't translate

if (i) temp_whole |= res_factor_3[res_shift - 1];

C command to pascal command.
Can anybody help?

Thank you

András

If the variable i is not equal to zero then temp_whole=temp_whole or res_factor[res_shift - 1]

hope this helps

 

[maui]

Re: Help translate C command

If the variable i is not equal to zero then temp_whole=temp_whole or res_factor[res_shift - 1]

That is I believe a binary OR too.

So if the variable (i) is not equal to zero then temp_whole=temp_whole binary or res_factor[res_shift - 1]

which means that if i is not zero then, if there are any 1's in the value returned by the function res_factor[res_shift - 1]. Then 1's are added to the variable temp_whole in the same bit positions.


Maui

 

[Foldesa]

Re: Help translate C command

Hello

what maui wrote is more then enough for me.

Than you

Added after 1 minutes:

Just 1 more thing I forgot.

I have a line:

if (temp_fraction < 1000u) LCD_Chr_CP('0');

what represents the "1000u", because it is not declared anywhere.

 

[jshroff]

Re: Help translate C command

1000u just means that it's an unsigned number, see **broken link removed**