Help me to understand this program is true or wrong

[fizo741]

Hi
Ive written these codes with help of app note to initiate mlx90614 but there are 2 errors in codevision so I cant debug my program to avrstudio4 to test it.It isnt complete actually.Can any one help me to undersatand where is wrong or what changes i should do?
Best regards

---

Code C - [expand]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
/*****************************************************
This program was produced by the
CodeWizardAVR V2.05.0 Evaluation
Automatic Program Generator
© Copyright 1998-2010 Pavel Haiduc, HP InfoTech s.r.l.
[url]http://www.hpinfotech.com[/url]
 
Project : 
Version : 
Date    : 8/25/2012
Author  : Freeware, for evaluation and non-commercial use only
Company : 
Comments: 
 
 
Chip type               : ATmega16L
Program type            : Application
AVR Core Clock frequency: 2.000000 MHz
Memory model            : Small
External RAM size       : 0
Data Stack size         : 256
*****************************************************/
 
#include <mega16.h>
#include<delay.h>
 Alphanumeric LCD Module functions
#include <alcd.h>
                          
                
#define  SCL      PORTC.0
#define  SDA      PORTC.1
#define SDA_HIGH  SDA=1
#define SDA_LOW   SDA=0
#define SCL_HIGH  SCL=1
#define SCL_LOW   SCL=0   
#define RAM_Access 0X00
#define RAM_Tobj1  0x07
#define SA         0x5A
#define EEPROM_Access 0x20 
#define HIGHLEV  3
#define LOWLEV   1
 
 
 
 
 void  START_bit() ;
 void  STOP_bit();
 void  DummyCommand(unsigned char byte);   
void TX_byte(unsigned char);
 void  send_bit(unsigned char bit_out);
 unsigned char Receive_bit(void);
float CalcTemp1(unsigned int data1);
  float CalcTemp1(unsigned int data1);
unsigned char RX_byte(unsigned char RX_buffer,unsigned char Bit_Counter);   
            
 
 
 
void main(void)
{
 unsigned char   SlaveAddress ;  
 unsigned char   command;
 unsigned int   data1,data2;
 float          t1,t2;
 
 
 START_bit();                   
 SlaveAddress=SA<<1;
 
command=RAM_Access|RAM_Tobj1;
 DummyCommand(SlaveAddress);
delay_ms(200);
 
 
STOP_bit();
PORTA=0x00;
DDRA=0xFF;
 
 
// Alphanumeric LCD initialization
// Connections specified in the
// Project|Configure|C Compiler|Libraries|Alphanumeric LCD menu:
// RS - PORTA Bit 0
// RD - PORTA Bit 1
// EN - PORTA Bit 2
// D4 - PORTA Bit 4
// D5 - PORTA Bit 5
// D6 - PORTA Bit 6
// D7 - PORTA Bit 7
// Characters/line: 16
lcd_init(16);
 
while (1)
      {
      
 
      }
}
 
void  START_bit() {
 
 
 SDA_HIGH ;
 
 delay_ms(0.005); 
SCL_HIGH;
delay_ms(0.005);
SDA_LOW;
delay_ms(0.005 );
SCL_LOW;
delay_ms(0.005 );
}
 
void STOP_bit(void)
 {
  SCL_LOW;
  delay_ms(0.005);
  SDA_LOW;
  delay_ms(0.005);
  SCL_HIGH;
  delay_ms(0.005);
  SDA_HIGH;           
  delay_ms(0.005);
  }
  
void send_bit(unsigned char bit_out )
 {  
  if(bit_out==0)
  SDA_LOW;
  else
  SDA_HIGH;
  delay_ms(0.05);
  SCL_HIGH;
  delay_ms(3000);
  SCL_LOW;
  SDA_HIGH;
  } 
  
unsigned char Receive_bit(void)
{ 
  unsigned char  Ack_bit;
  
  SCL_HIGH;
  delay_ms(3000);
  if(SDA==1)
  Ack_bit=1;
  else
  Ack_bit=0;
  SCL_LOW;
  delay_ms(1000);
  return Ack_bit;
 }  
     
 
 
void  TX_byte(unsigned char Tx_buffer)
{
 
    
 
  unsigned char  Bit_counter;
  unsigned char  Ack_bit;
  unsigned char  bit_out;
  
  
  for(Bit_counter=8;Bit_counter>=1;Bit_counter--)
  {   
            if(Tx_buffer&0x80==1)
            bit_out=1;
            else
            bit_out=0;
            send_bit(unsigned char  bit_out );
            Tx_buffer<<=1;
            }
          Ack_bit=Receive_bit();
     }       
              
void DummyCommand(unsigned char Tx_buffer)
{
  START_bit();
  TX_byte(unsigned char  Tx_buffer );
  STOP_bit();
  }   
float CalcTemp1(unsigned int data1)
 {
   float temp1;
   temp1=(data1*0.02)-273.15;
   return temp1;
   }
 
float CalcTemp2(unsigned int data2)
 {
   float temp2;
   temp2=(data2*0.02)-273.15;
   return temp2;
   }
   
unsigned char RX_byte(unsigned char RX_buffer,unsigned char Bit_Counter)
{
  usigned char   RX_buffer;
  unsigned char  Bit_Counter;
 
  
for(Bit_Counter=8;Bit_Counter>=1;Bit_Counter--)
{  
   if(Receive_bit()==1)
   {
     SDA_HIGH;
     RX_buffer<<1;
     }
   else
     {
      SDA_LOW;
      RX_buffer<<=1;
      }
        }
   return RX_buffer;
   }

---

 

[FvM]

there are 2 errors in codevision

I guess, you would want to tell the error location if interested in actual help.

 

[alexan_e]

Ive written these codes with help of app note to initiate mlx90614 but there are 2 errors in codevision so I cant debug my program to avrstudio4 to test it

Do you get the error when you try to compile in codevision or when you try to compile in AVR studio?

 

[fizo741]

I dont konow why but I had 2 errors know i have 4 errors!I got errors when i wanted to compile in codevision.Can you tell me if my RX_byte function is correct?I want to know if my program act properly?Because of this i want to test in avrstudio4.
Errors are:
L172:Undefined symbol 'unsigned'.
L181:Undefined symbol 'unsigned'.
L200:Undefined symbol 'unsigned'.
L201:Must declare first in block.
Thanks in advance.

 

[FvM]

You didn't quote this error message correctly, according to the posted code it's actually

L200:Undefined symbol 'usigned'.

L201 is a follow-up error
L172 and L181 are C-syntax errors. "unsigned char" makes no sense in this place. Looks like copy-and-paste errors.

Generally speaking, you want to learn more about C-language.

 

[fizo741]

Excuse me! I didn't understand what should i do to make errors correct?!I must correct
my program and I like to learn more about C-language too.

---

Code C - [expand]
1
2
3
4
L172:Undefined symbol 'unsigned'
L181:Undefined symbol 'unsigned'.
L200:Undefined symbol 'unsigned'.
L201:Must declare first in block

---

.

 

[nba83]

you cannot use unsigned char in function calls , in

 send_bit(unsigned char  bit_out );TX_byte(unsigned char  Tx_buffer );

must be

 send_bit(bit_out );TX_byte(Tx_buffer );

and in defining local variable,it must not be the same as function input parameters

unsigned char RX_byte(unsigned char RX_buffer,unsigned char Bit_Counter)
{
  usigned char   RX_buffer;
  unsigned char  Bit_Counter;

Bit_Counter and RX_buffer already defined in function parameter

 

[FvM]

Bit_Counter and RX_buffer already defined in function parameter

But not serving an understandable purpose...

 

[fizo741]

Thanks a lot.:smile:

But not serving an understandable purpose...

Would you explain more please?
I have to test my program in Proteus step by step to understand if different functions work properly but i don't know how?!Could you guide me please?