Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me to implement error amplifier using Verilog-A

Status
Not open for further replies.
N

Ni1009

Newbie level 4
Newbie level 4
Joined
Apr 28, 2010
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
India
Activity points
1,339
error amplifier

Dear Forumites,

Has anybody implemented error amplifier for compensation of regulator using Verilog-A. If so can anyone post the verilog-A code which can be used for type-2 compensation. I have tried creating one using model writer, but to the failure. So looking forward for some help.


Ni1009
 

For this purpose, you can use the simple amplifier in the ahdlLib library (or base your own design on that).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top