hello, I would like to drop the voltage from 250vdc of a tube amplifier to 12vdc so that i can use a regulator to drop the voltage to 6.3 to feed 6 tube's filaments, wich total current is less than 6A i guess
i know i can use a cheap smps 12vdc psu with $1 from ebay for thiz task, but I dont want that.
i have spare transformers, its no problem for me to use them. however,
i need 0.6a for 2x 6j8 tubes , 1.8A for 6L6 and 1.2A for 12ax7 total 3.6a plus a little bit for regulation lets say 4.5a /6.3 v is around 2.2a@12v?
i want to use a resistor in end, and i am asking if it will work constantly.. otherwise no problem, i plug the 12v transformer and lm317