Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me make a program to interface PIC/AVR using USB port

Status
Not open for further replies.
S

snaider

Member level 5
Member level 5
Joined
Jul 8, 2004
Messages
80
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
597
How I can made a program who interface a pic or avr with the usb port , so I can send data and sound (analog sound), do I need to create a driver , with which program a can control the USB , how I get access to the usb .
 

Re: USB Driver INTERFACE

One simple way to transmit and receive USB is to use a USB transciever such as the USB1T11A.
 

Re: USB Driver INTERFACE

Try FT232BM from FTDI. Cheap and easy to use.
You can acces the device with free dll or as VCM (virtual com port)
In the web you can find example programs for Builder and Delphi
www.ftdichip.com
 

USB Driver INTERFACE

Hi. You can use CP2101(CP2102) from SiLabs using simple RS232 Interface.

Best Regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top