Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me get a HP instrument model number

Status
Not open for further replies.
flatulent

flatulent

Advanced Member level 6
Advanced Member level 6
Joined
Jul 19, 2002
Messages
4,624
Helped
489
Reputation
980
Reaction score
151
Trophy points
1,343
Location
Middle Earth
Activity points
46,689
site:edaboard.com vector voltmeter

Some years ago HP sold a one port impedance meter that went up to 110 MHz. It was all analog with two analog meters showing magnitude and phase. The frequency was set with a range switch and rotary knob.

What was the model number of this instrument?
 

Re: REQ HP model number

Maybe you're thinking of the HP8405A Vector Voltmeter? Freq range is 1 to 1000 MHz.

**broken link removed**
 

Re: REQ HP model number

It is not the voltmeter I want. The instrument had a single probe and a hole in the front panel with a 50 ohm load. The probe would mate with this hole to calibrate the instrument. The 4193A was a subsequent all digital version.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top