Help me fix a 89S51/52 programmer

Status
Not open for further replies.

nikhildascl

Full Member level 3
Joined
Apr 15, 2012
Messages
150
Helped
15
Reputation
30
Reaction score
14
Trophy points
1,318
Location
Kerala, India
Activity points
2,115
I got this circuit for antara programmer. But this programmer is not working. Anybody know about this?
 

Re: 89S51/52 prigrammer.

Use this programmer, no need to complicate situation :

 

Attachments

  • IspPgm.rar
    129 KB · Views: 71

Re: 89S51/52 prigrammer.

Did you load the firmware of AT89C2051? You will need another programmer to do that (parallel programmer if you use AT89C2051, or ISP programmer if you use AT89S2051).
 

Re: 89S51/52 prigrammer.

tpetar said:
Use this programmer, no need to complicate situation :

View attachment 75791
Click to expand...
Sir i am using my laptop. So as you know there is no parallel port. I am using a USB-RS232 converter. So i have only one option. Is there any alternate solution for this?

- - - Updated - - -

Projetos_afg said:
Did you load the firmware of AT89C2051? You will need another programmer to do that (parallel programmer if you use AT89C2051, or ISP programmer if you use AT89S2051).
Click to expand...
Sir, I already loaded the firmware for AT89c2051 from a parallel programmer. But still it is not working.
 

Re: 89S51/52 prigrammer.

Sir i am using my laptop. So as you know there is no parallel port. I am using a USB-RS232 converter. So i have only one option. Is there any alternate solution for this?
Click to expand...

Use USB to LPT converter.
 

Re: 89S51/52 prigrammer.

What software are you using for this programmer? What error it shows?
 

Re: 89S51/52 prigrammer.

Try this :

https://technosains.com/USB-AVR-downloader-programmer.htm


NOTES FOR ACCEPT AT89S series

1. PROGISP172 firmware-> USB51/main.hex when burning firmware to ATmega8, set fuse bit Low Fuse=EF, High Fuse=C9 also use this Circuit

2. Reset Circuit for AT89S (S-series), the Capacitor (Elco) must be 1uF NOT 10uF, so use 1uF/16V and the Resistor usually 10K ohm
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…