Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me design a silicided poly PGS

Status
Not open for further replies.
hrkhari

hrkhari

Full Member level 4
Full Member level 4
Joined
Mar 4, 2004
Messages
223
Helped
6
Reputation
12
Reaction score
3
Trophy points
1,298
Activity points
2,250
Hi Guys:

In designing a silicided poly PGS, I face with this error " The CMOS1 contact process is designed to contact silicided Island or Poly only. It is not designed to make connection to unsilicided Island or Poly". Hence if I design a poly overlapped with silicide bloack layer to form the PGS, with X shaped Metal1 and contact PGS ground, I have this Poly+Silicide block overlapping with the Metal1+contact, how do I really design the silicided poly PGS in compliance with this error. Thanks in advance

Rgds
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top