Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me design a NE3210S01 LNA using ADS

Status
Not open for further replies.
A

ashhad

Newbie level 1
Newbie level 1
Joined
May 8, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
china
Activity points
1,289
Design a low-noise single stage amplifier using microstrip on 1-mm-thick alumina substrate (εr =9.6) and a FET (proposed type: NE3210S01) with the following specifications:

Center Frequency: 2.3GHz
Bandwidth: 10%
Gain (min): 12dB
Noise Figure (max): 1dB
Output VSWR (max): 2.0:1 (matched to 50Ω source and load)

i need to design this using ADS
??
 

Re: NE3210S01 LNA ADS

See tutorial here:

**broken link removed**
 
  • Like
Reactions: noori.re

    N

    noori.re

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
Re: NE3210S01 LNA ADS

Attached is schematic & simulation results.[/img]
 
Re: NE3210S01 LNA ADS

zeshan102 said:
Attached is schematic & simulation results.[/img]
Click to expand...
i want to simulate attached picture in cst anyone knows the procedure?
 

Attachments

  • transistor5.pdf
    146.1 KB · Views: 315

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top