Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me build an audio detector that will produce DC voltage when audio is detected

Status
Not open for further replies.

danesh

Full Member level 3
Full Member level 3
Joined
Nov 24, 2003
Messages
184
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
1,343
hi,
do anyone has suggestion for me to built a audio detector cct whereby the cct will produce a dc voltage at presence of audio and 0V wen no audio detected over tht line....


Thanks
 

Re: Audio Detector

using diode and R, C can do it!!

like AM demodulator.
 

Re: Audio Detector

you can use LM324 to construct a AC couple amplifier,

then rectify the output signal use a 1N4148 diode,

and filter the retified waveform use a parallel

RC network.


best regards





danesh said:
hi,
do anyone has suggestion for me to built a audio detector cct whereby the cct will produce a dc voltage at presence of audio and 0V wen no audio detected over tht line....


Thanks
 

Re: Audio Detector

i kind of use the line for both switching and routing the audio signal
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top