tsinghua said:
No necessary. If you have the tar files, you can simply untar them. And then in the CD1 directory, you will find a script named setup.sh. Just run it with "./setup.sh".
yes. i have untar the files, and find setup.sh in CD1 directory. But i still can't install ldv50. The following are the installation process. Pls read it and teach me, Thanks !
Steps:
A: Main Menu
1) load available products
2) list installed products
3).......
Type your choice: 1 (
I select 1st option)
B: CD#1 of the media ste being used is required
You must now identify where the cd_rom is mounted
1) local (mounted to this machine)
2) Remote (mounted to another machine)
Type your choice: 1 (
I select 1st option)
C: Specify the cd_rom mount point
1) cd_rom
2) other
Type your choice: 2 (
I select 2nd option)
and then enter the dirctory of mount point: /tools/ldv50/cd1
The return infor is " image not found
unable to read media /tools/ldv50/cd1".
So, here, i cant continute install my software. My installation file is in dirctory "/tools/ldv50/cd1 and /tools/ldv50/cd2".
tsinghua,
Could you give me some advice? Thank you!
David
Any another guy's suggestions are welcome. Thank you all!