Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HELP! lvs for bipalor using dracula?

Status
Not open for further replies.
C

cenyunyun

Newbie level 5
Newbie level 5
Joined
Mar 2, 2006
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,346
Hi,
Now I have designed a bipalor layout, but I don't know how to extract those devices.Can you give me an example about it? thanks.
Regards,
cenyunyun
 

just read the DRACULA manual for the bjt device part.

it is a little different from how you extract the MOS transistor and all the other device. but it is the same as DIODE.
 

in the drcaula lpe ruledeck uncomment lpeselect bjt line.

Added after 2 minutes:

in the drcaula lpe ruledeck uncomment lpeselect bjt line.
 

thanks, i have solved it. Though dracula help is very useful and detailed, actually we will meet many difficulty which we can't expect. If somebody have any questions or have any lvs program, we can learn each other.
Thanks again!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top