help in Usart MikroC code

milanino · Apr 18, 2013

i would like to translate this struction in MikroC code
If the pic send a data (Tx pin) the output pin 5 of portd has 1 logic
if the pic receive data (Rx pin) the output pin5 of portd has 0 logic
Help me please

ec_nisarg · Apr 18, 2013

if you are using interrupts, you can set this bit in the interrupt itself..

jayanth.devarayanadurga · Apr 18, 2013

Code C - [expand]
1
2
if(RCREG)PORTD.F5 = 1
else if(TXREG)PORTD.F5 = 0;

ec_nisarg · Apr 18, 2013

if he will read those registors via if condition, they will get cleared... am i right??

jayanth.devarayanadurga · Apr 18, 2013

I think so. If not he has to clear it manually.

ec_nisarg · Apr 18, 2013

as per i know in pic once we read from rxreg it will get cleared, (or next data in buffer takes place in it). is accessing this reg in any way will clear it..

milanino · Apr 18, 2013

(RXREG) or (RCREG)??

jayanth.devarayanadurga · Apr 18, 2013

See datasheet. The Register in which you receive data.

help in Usart MikroC code

milanino

Member level 2

ec_nisarg

Full Member level 2

jayanth.devarayanadurga

Banned

ec_nisarg

Full Member level 2

jayanth.devarayanadurga

Banned

ec_nisarg

Full Member level 2

milanino

Member level 2

jayanth.devarayanadurga

Banned

Similar threads

Code C - [expand]
1 2	if(RCREG)PORTD.F5 = 1 else if(TXREG)PORTD.F5 = 0;

help in Usart MikroC code

Member level 2

Full Member level 2

Banned

Full Member level 2

Banned

Full Member level 2

Member level 2

Banned

Similar threads

Privacy & Transparency

Privacy & Transparency