Help- importing Spectre file (resistor model) into ADS

resistors ads model

Dear all,
Please help me on the importing spectre model into ADS. I found the error as svcvs is underfined. Attached is part of file.

//
simulator lang=spectre insensitive=yes
section rf_res_device
//
subckt RESRFA_D1 (1 2 ref)
Rs1 (1 n1s1) resistor r=1e-3
Rs2 (2 n2s1) resistor r=1e-3
e11 (n1s1 n1s2 1 ref) svcvs gain= 0.997290206
+numer=[ 1.91630E-01
+ 5.94766E-11
+ 3.39422E-21
+ 1.80999E-32
+ 8.95667E-44 ]
+denom=[ 1.92151E-01
+ 5.91770E-11
+ 3.26764E-21
+ 1.03402E-32
+ 5.88734E-44
+ -9.23629E-56 ]
e12 (n1s2 n1s3 1 n1s1) svcvs gain= 99864.5077
+numer=[ 1.91891E+04
+ 5.93268E-06
+ 3.33093E-16
+ 1.42201E-27
+ 7.42200E-39
+ -4.61814E-51 ]
+denom=[ 1.92151E-01
+ 5.91770E-11
+ 3.26764E-21
+ 1.03402E-32
+ 5.88734E-44
+ -9.23629E-56 ]
ends
endsection rf_res_device