Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help identifying component

Status
Not open for further replies.

Shammydab

Newbie
Newbie level 1
Joined
Jan 8, 2023
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
10
Hi, please can someone help me identify this component on a eufy floodlight camera mainboard.
The mainboard has about 6 of these components dotted around and 3 of these are blown.
I need to replace these components which are marked 18L with 6 legs and are tiny.
Please can someone tell me what they are and where to get them.......Thanks.

2020_0101_003933_003.JPG
 

Hi,

the picture isn't really sharp, so it is hard to see how the pins are connected. The silkscreen might give additional information, is there a "Qxxx" or an "Uxxx" marking close to the device? Further, the surrounding components are of interest too, so one might have a clue which funtion the IC has. E.g. the large component on top looks like an inductor to me. Thus it might be some kind of switching mode IC. The package itself looks like a SOT-666 or SOT-563 to me. It might be the TLV62568 [1] from TI.

[1] https://www.ti.com/lit/ds/symlink/t...https%3A%2F%2Fwww.ti.com%2Fproduct%2FTLV62568

BR
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top