Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help: about bus bandwidth

Status
Not open for further replies.
H

handsome

Junior Member level 3
Junior Member level 3
Joined
Oct 17, 2003
Messages
31
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
191
In an MCU ,how to reduce bus bandwidth occupyed by LCD controller?And how to evalate the result?THx
 

You could have a dedicated bus from memory interface to your LCDC to releave bus load. Both memory interface and LCDC need to be redesign for sure...
 

The only way you can reduce the bandwidth that the LCD requires is to reduce resolution or color depth...
Otherwise, you can look into various ways of satisfying said bandwidth requirement.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top