becogriep
Newbie
Hello, guys,
I am a new CST user, and I am learning it replicating experimental results from articles and I've had problems with a rectangular microstrip antenna from the attached article. I chose the configuration a = 1.7 cm and b = 1.1 cm. The first result I am comparing to the simulation is impedance vs. frequency (figure 2 in the article), but I can't reach it. I would like to share with you the project I designed and the simulation results so you can give me tips.
Thank you!
I am a new CST user, and I am learning it replicating experimental results from articles and I've had problems with a rectangular microstrip antenna from the attached article. I chose the configuration a = 1.7 cm and b = 1.1 cm. The first result I am comparing to the simulation is impedance vs. frequency (figure 2 in the article), but I can't reach it. I would like to share with you the project I designed and the simulation results so you can give me tips.
Thank you!