[SOLVED] HDMI to MIPI CSI2 solution

Status
Not open for further replies.
R

rmamba

Newbie level 3
Joined
Apr 20, 2012
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,299
Hi!

I need to convert HDMI signal to CSI2 so that I can feed it to OS on the board.
Toshiba makes a one chip solution but I don't have access to datasheet so I need other method.
TFP401A will convert HDMI to parallel RGB. Is there any simple way to convert this to CSI2?
 

FPGA would be an option yes. Maybe for proof of concept it would be ok but not for potential mass production
 

I'm not in a hurry

But I found a better solution for me. First I wanted to use pandaboard with OMAP4460 which only has CSI2 input.
But I'm going with MCIMX6Q-SL, SABRE-LITE, DEV BOARD instead which has parallel camera input too which makes it easier, price is about the same
And both have good linux OS support
 

There is a chip from toshiba only which converts parallel RGB to MIPI CSI-2.
https://www.toshiba.com/taec/components/ProdBrief/11J02_TC358746_ProdBrief.pdf

 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…