Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[HDMI] Audio Embedder

Status
Not open for further replies.

mppower12

Newbie level 1
Newbie level 1
Joined
Sep 7, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
10
Hi All,
I have been playing around with the idea of making an HDMI audio embedder. I apologize if this is the incorrect category. I am hoping someone might be able to provide some insight on whether or not what I have so far is on target and if I am missing any big pieces to this puzzle.

The functionality of the unit will be as follows:
1. Accept a video input, right now I am going to stick with an HDMI signal on the input side.
2. Accept a stereo analog input.
3. Output an HDMI signal that combines both the HDMI input (video) and analog audio input.
(A functional block diagram is below)
AUDIO_EMBEDDER.jpg

At this point I am looking at 3 major components:
1. HDMI Receiver -- Analog Design ADV7611
2. HDMI Transmitter -- Analog Design ADV7511
3. Audio ADC -- Cirrus Logic CS5343/4

Any advice or information is appreciated.

Thank You
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top