Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

HDD spins but won't recognize neither won't boot...what to do?

Status
Not open for further replies.

alijayadv

Newbie level 1
Newbie level 1
Joined
Dec 5, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,289
I was using an old Samsung hdd and after a reboot it showed that the hdd is recognized but it won't go further,after i removed the drive i started the computer again and it booted URGENT y.I bought another hdd few weeks ago and after a while it made the same problem.I thought that this could be caused by the hdd but after buying the second one and failing such as the first after only two weeks of using i think the problem is in the motherboard.And both hdd are spinning and working on some computers that i tried lets say 2 outta 3.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top