SIGI44
Junior Member level 1
- Joined
- Jan 19, 2012
- Messages
- 16
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- ITALY
- Activity points
- 1,398
Hello,
I need to simulate the harmonic distorsion of two OpAmps (ADA 4817 and AD 8033 and maybe other similar) at different frequency (range Dc to 20Mhz).
I am lucky to have access to Orcad Pspice. Unfortunately the models provided by Analog Devices tell " distortion is not characterized ".
Any suggestion or workaround ? Thank You.
The only way I have find is to build the prototype and measure the distorsion with generator and oscilloscope, but this is time consuming...
I need to simulate the harmonic distorsion of two OpAmps (ADA 4817 and AD 8033 and maybe other similar) at different frequency (range Dc to 20Mhz).
I am lucky to have access to Orcad Pspice. Unfortunately the models provided by Analog Devices tell " distortion is not characterized ".
Any suggestion or workaround ? Thank You.
The only way I have find is to build the prototype and measure the distorsion with generator and oscilloscope, but this is time consuming...