HanRun RJ45 pins postition

[baby_2]

Hello,
In this picture I can't find the X position of pins of 1,3,5,7. I will thankful if you could help me. HanRUn911105A

 

[betwixt]

The positions can be implied, they are 2.54mm apart horizontally, 2.54mm above pins 8,6,4,2 and offset half a pin space from the ones below.

Brian.

 

[baby_2]

Thank you so much for your help. Could you help me to design dp83848I?(https://www.ti.com/lit/ds/symlink/dp83848c.pdf)
In the datasheet it doesn't mention the value of these parameters directly.


Thanks

 

[FvM]

You may refer to the TI land patter specification, which isn't contained in this datasheet. https://www.ti.com/lit/an/snoa293b/snoa293b.pdf