GYMUX Function Warning in VHDL,

Zylen92 · Dec 24, 2012

Hi fellow forum members,

In my digital design, the last module of the top module is a MUX. This MUX has 4 inputs which are 8 bit buses, 2 inputs which are selects and 1 output which is a 8 bit bus. When the synthesis is done(which is done without error), in the warning section I get this. Actually I never heed to the warning section but in this case, when I wrote a workbench and test the design, the output never changed .Although the individual input buses carried the signals to MUX without problem in testbench, after MUX there was no signal whatsoever, just UUUUUUUU.

Here is the warning;

Code:

WARNING:Pack:266 - The function generator
SawtoothModule/Mrom_dataout2_varindex00007 failed to merge with F5
multiplexer SawtoothModule/Mrom_dataout2_varindex00007_f6/MUXF5.I1. There is
a conflict for the GYMUX. The design will exhibit suboptimal timing.
WARNING:Pack:266 - The function generator
SawtoothModule/Mrom_dataout2_varindex00007 failed to merge with F5
multiplexer TriangleModule/Mrom_dataout4_varindex00007_f6/MUXF5.I1. There is
a conflict for the GYMUX. The design will exhibit suboptimal timing.

Following is my MUX module,

Code VHDL - [expand]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
 
entity MUXModule is
Port( 
 
sinewave : in std_logic_vector ( 7 downto 0);
sawtoothwave : in std_logic_vector ( 7 downto 0);
squarewave : in std_logic_vector ( 7 downto 0);
trianglewave : in std_logic_vector ( 7 downto 0);
slct : in std_logic_vector (1 downto 0);
amplitude : out std_logic_vector (7 downto 0));
 
end MUXModule;
 
architecture Behavioral of MUXModule is
 
begin
 
process(slct,sawtoothwave, sinewave, squarewave, trianglewave)
 
begin
 
    case slct is 
        when "00" => 
            amplitude <= sawtoothwave;
        when "01" =>
            amplitude <= sinewave;
        when "10" =>
            amplitude <= squarewave;
        when "11" =>
            amplitude <= trianglewave;
        when others =>
            amplitude <= "00000000";
    end case;   
 
end process;    
 
end Behavioral;

GYMUX Function Warning in VHDL,

Zylen92

Guest

Similar threads

GYMUX Function Warning in VHDL,

Zylen92

Guest

Similar threads

Privacy & Transparency

Privacy & Transparency