Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Guitar effect of own construction

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318
**broken link removed**

This is a project of guitar effect. PCB was made in thermal transfer method. Schematic and paths were taken from: LINK. Connection of the switch was based on: LINK

Schematic: **broken link removed**

List of elements: **broken link removed**

PCB: **broken link removed**

Mounting scheme: **broken link removed**

Connection of the PIN-6 if you do not have PIN-9:LINK

The sound is strong and expressive, its tone can be adjusted (bass, min, teble, gain, volume).

Here are samples of the sound:
  1. **broken link removed**
  2. **broken link removed**
  3. **broken link removed**
  4. **broken link removed**
  5. **broken link removed**

Pictures:
34_1170007800.jpg

59_1170007837.jpg

8_1170007942.jpg

76_1170007979.jpg

85_1170007994.jpg

4_1170008016.jpg

75_1170008038.jpg

62_1170008057.jpg

56_1170008073.jpg

31_1170008090.jpg

72_1170008109.jpg


Link to original thread (useful attachment) – Efekt gitarowy dla wymagających - Marshall
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top