Guideline needed for a design of SMPS with 200AMPS/50Volts

Status
Not open for further replies.
R

RATAN ROY

Junior Member level 1
Joined
Jul 29, 2009
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Kolkata,West bengal,India
Activity points
1,410
design Guideline

Hi.........
I need help to design a SMPS with 200AMPS/50Volts,anybody can help me by giving the ways along with any schematics or any other details
 

design Guideline

is it mains fed.

if so , start with pfc, probz interleaved pfc as u 10KW.

wot is input volts?
 

design Guideline

you need a three phase power factor corrector to start........then when you have your DC bus after that, you go for i believe multiple phased SMPSs in parallel because 10KW is too much for a single full bridge topology.

it will be a big supply.......with cooling in it.

i'd say about 70cm by 50cm by 20cm minimum
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…