Hi everybody, I have an question regarding GSM phone power outputs.
From what I can understand a typical GSM900 phone radiates at a maximum of 2Watt and because of the TDMA usage the average maximum power level is 250mW.
For a GSM1800 phone the power levels are the half of the above (1W max and 0.125W average)
What I need to know is:
Are the above values the peak (Amplitude) values or the RMS values?
In GSM (GMSK modulation) only peak power is measured.
The power measurement is done for more than 100 bursts, and finally is done an average of the results.
In GSM (GMSK modulation) only peak power is measured.
The power measurement is done for more than 100 bursts, and finally is done an average of the results.