gsm gprs moule problem

Status
Not open for further replies.
K

Kingjeffrey

Newbie level 2
Joined
Mar 18, 2013
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,295
hello i'm using a sim900D and i'm trying to send a sms through microcontroler
the problem that i was encounter right now is that when i reach the AT+CMGF=1$0D the outcome is error instead of ok..
how can i fixed this please do help me..asap! i'm using a terminal..
 

For sending sms, the syntax for that is AT+CMGS="xxxxxxxxxxx"<CR><LF> where xxxxxxxxxxx = cell phone number to which you want to send SMS. The hex value for <CR> = 0x0D, and for <LF>=0x0A.
 
yahp i know that....
my only problem is AT+CMGF=1$0D I CAN't proceed to other command if i dont fix the error...is their any hex that i can use or if you know the process please do help me or take down the whole program using terminal.,,tnx alot
 

Okay! But i am not able to get you why you want to use AT+CMGF=1$0D?
 

i think you have some problem in code to sent the command from microcontroller. So, try the following code to sent from microcontroller

AT+CMGF=1,0DH,0AH (where 0DH and 0AH both used for special character (enter))
i think this will help you, if it will not solve your problem then sent me your code.

- - - Updated - - -

i think you have some problem in code to sent the command from microcontroller. So, try the following code to sent from microcontroller

AT+CMGF=1,0DH,0AH (where 0DH and 0AH both used for special character (enter))
i think this will help you, if it will not solve your problem then sent me your code.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…