[AVR] gsm and rfid reader interfacing with atmega16

Status
Not open for further replies.

dhk

Newbie level 5
Joined
Oct 12, 2014
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
56
Can both gsm and rfid reader be interfaced with atmega16 mcu as it has got only one USART? Are there any other methods to interface both with atmega16?
 

If GSM is not used to receive SMS but only for sending SMS then Bi Lateral Switch can be used and both RFID and GSM can be connected to ATMega16's Single UART.
 

I am using GSM for both sending and receiving sms. So atmega16 cant be used to do this task?
 

If RFID is communicating and at the same time SMS arrives then you will miss the automatic SMS arrival notification reading.
 

Thanks for the reply. Please can you suggest the method to interface both rfid and gsm together.
My project requires the mcu to first read data from RFID reader and then GSM modem will commumicate with server both to and fro.
 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…