Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ground connection! should gnd connect to -battery terminal ?

Status
Not open for further replies.

aj_silverthunder

Full Member level 3
Full Member level 3
Joined
Jul 30, 2009
Messages
179
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
asia
Activity points
2,601
ground connection!

here in this circuit,at the bottom of the circuit u can see many ground connection,i think and one of them should be connected to the negative terminal of the power source! the schematic is here " https://www.flickr.com/photos/aj_silverthunder/4141615924/ "
and the others are of no use!what do u say ,am i right!
 

ground connection!

All the grounds are connected to the ground plane on one side of the double-sided pcb.

Of course the 0V of the power supply connects to the ground of the circuit.
 

Re: ground connection! should gnd connect to -battery termin

I didn't see a power supply in the schematic, but since I don't see anything that uses a negative voltage, I'd say the negative of the battery goes to ground along with everthing else.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top