MAAASD
Member level 4
- Joined
- Feb 24, 2012
- Messages
- 76
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 1,832
Hi guys, I hope all is fine. I have seemingly a simple question, for the schematic below i want to connect the voltage source nets to all the input pins of the compenet; i know that one solution is to add wires to these pins and name them same names as the power nets
but for a large design this is a very tedious task. So what i want to do is just adding the power sources and give them names as the input pins of the instant, hopfully, all instants pins with the same name will be connected to the power sources matching their name. Is that applicable? I tried the schematic below but the o/p was wrong, meaning that it doesn't understand my connections. Any help?
Thanks in advance.
but for a large design this is a very tedious task. So what i want to do is just adding the power sources and give them names as the input pins of the instant, hopfully, all instants pins with the same name will be connected to the power sources matching their name. Is that applicable? I tried the schematic below but the o/p was wrong, meaning that it doesn't understand my connections. Any help?
Thanks in advance.