gate driver for IRG4PH50UD

Status
Not open for further replies.
From what I can see there's nothing special about those particular IGBTs that requires special gate drive considerations. The most typical method is to use bootstrapping gate drive ICs like the IR2110 or the many similar ICs out there.
 
Reactions: katsar

    K

    katsar

    Points: 2
    Helpful Answer Positive Rating
Thanks for your answer. I also found another driver:
**broken link removed**
Is it suitable for driving those igbts?
 

That's the basic idea. But you might want something with higher output current capability, and rated up to 1200V, if you need to drive at voltages >600V.
 

The inverter that I'm going to built will be supplied 320VDC. For load I will use a resistor, and has to create a current reference (Iref). That's it. So I don't need to drive voltages> 600. So will this drive suits me?
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…