Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Galvanic isolation for USB

Status
Not open for further replies.
F

foifsensej

Junior Member level 1
Junior Member level 1
Joined
Apr 8, 2004
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
117
Does anyone know how to isolate USB 2.0 galvanicaly? I don't need more than 12 MBit/s.

Thanks [foif]sensej
 

you can get device chips that are Low speed (which are operating at 1.5Mbps) that are still USB2.0 compliant.
 

where do you get them from?
 

You can write Cypress, Philips for samples.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top