FXT009 Short Message Problem

When i send sms use

i got :

+ CMS ERROR 512

Click to expand...

When i send sms to the number, my sms pending also.

Can someone help me?

+ CMS ERROR 512 means "SIM Not Ready". Did you check with your GSM Module datasheet?

1. AT+CMGS command given through uC or Hyperterminal?
2. Can you able to receive SMS on same SIM CARD?
3. Can you able to make call from your GSM Module (same SIM CARD)?
4. AT+CMGF=1 set?
5. +62 is your country code?
6. Will this Module work in your country?
7. Sufficient balance amount available in SIM CARD.

pmk

1. Can you able to send SMS using same SIM CARD from your mobile phone?
2. have you checked with different SIM CARD on GSM Module?

pmk

For speedEC

1. AT+CMGS command given through uC or Hyperterminal?
i use hyperterminal
2. Can you able to receive SMS on same SIM CARD?
if i use the number on my mobile phone i can receive and send, but when the sim card i insert to modem, i can't send
and receive
3. Can you able to make call from your GSM Module?
How can i do it? can you help me?
4. AT+CMGF=1 set
off course
5. +62 is your country code?
yes, i live at indonesia
6. Will this Module work in your country?
i don't know, but when i try gprs fitur it's work
7. have you checked with different SIM CARD on GSM Module?
i will try

- - - Updated - - -

Oh ya, i forgot. MY firmware 7.45.0
its's my problem because firmware isuue? if it's firmware problem how to solved it? thx.

MY firmware 7.45.0
its's my problem because firmware isuue? if it's firmware problem how to solved it?

Click to expand...

How do you arrive to this as firmware problem? If you want to update the firmware, you have to ask your seller (mostly they don't have) or company website and update the GSM Module through DB_RX and DB_TX pins. You cannot update the firmware if you bought as GSM Modem. If you have evaluation board then there will debug port that you can update the firmware. Consult your seller/company website for more info.

- - - Updated - - -

3. Can you able to make call from your GSM Module?
How can i do it? can you help me?

Click to expand...

just issue "AT" command ATD+62<PH NUUMBER>;
See datasheet for details on ATD command.

pmk