Fusion360

[Max01800]

Guys i'm designing a pcb on fusion 360. I need to use a component which is not in the fusion library. So i added the library for the 2d and footprint model but i don't know how to add the 3d model. Because the 3d model is in another file

 

[wwfeldman]

you didn't say what format the 3D model is

this may help:

How to Add 3d step file in existing pcb library

Hello Team, I am Anuradha using Eagle around 2 to 3 Years now as Eagle integrated in Fusion , I might confused about work flow of pcb component lib 1) i can not add 3d step file in my existing library 2) can i used my existing libraries 3) as per my understating component libraries I used in...

forums.autodesk.com

the 4th post of 9 (Jorge Garcia) writes how to do it, but the instructions are a little short

this video should help

i've done his a few times
the 3D model needs to be positioned properly relative to the footprint
i move the model in x, then y then z to line up the pins and pads and etc
moving in one direction at a time makes it easier for me