Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

FT232BM in BitBang mode

Status
Not open for further replies.
M

monnoliv

Advanced Member level 4
Full Member level 1
Joined
Mar 9, 2004
Messages
114
Helped
7
Reputation
14
Reaction score
0
Trophy points
1,296
Location
Belgium
Activity points
1,299
Hello,

For a new project I'm using the FT232BM in BitBang mode. When I put (by SW) the FT232BM in BitBang mode via the FT_SetBitMode command, the PWREN# pin (15) is no more activated !!! When I came back to the UART mode, the PWREN# is reactivated. I think that's a bug in this device since the PWREN# pin must be activated whatever the mode is (BITBANG or UART).
Is somebody has more informations ?

Thanks a lot.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top