FPGA ISSUE

Status
Not open for further replies.
G

gary36

Full Member level 4
Joined
Mar 31, 2018
Messages
235
Helped
0
Reputation
0
Reaction score
0
Trophy points
16
Activity points
2,023
I have designed a custom board around 10M16SAU324I7G device. The device programs well. But I am unable to get any responses to the inputs provided to FPGA. Do break it down, I tried to assign a test point on the board (connected to FPGA) to the sysclk read through FPGA. I found no activity on the test point. SYSCLK was found ok in scope. I do not know if really FPGA is sensing the SYSCLK. Perhaphs I may have to use in systems probes to debug. If there are any tips, please share
 
Last edited by a moderator:

Use Signaltap tool to monitor the input signals. Sure you have assigned the correct pins for the inputs?
 

gary36 said:
I have designed a custom board around 10M16SAU324I7G device. The device programs well. But I am unable to get any responses to the inputs provided to FPGA. debug. If there are any tips, please share
Click to expand...

Hello,

maybe you can join schematics of this board to your post. I think it should be helpful.

Best Regards
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…