FPGA ISSUE

[gary36]

I have designed a custom board around 10M16SAU324I7G device. The device programs well. But I am unable to get any responses to the inputs provided to FPGA. Do break it down, I tried to assign a test point on the board (connected to FPGA) to the sysclk read through FPGA. I found no activity on the test point. SYSCLK was found ok in scope. I do not know if really FPGA is sensing the SYSCLK. Perhaphs I may have to use in systems probes to debug. If there are any tips, please share

 

[FvM]

Use Signaltap tool to monitor the input signals. Sure you have assigned the correct pins for the inputs?

 

[FlyingDutch]

I have designed a custom board around 10M16SAU324I7G device. The device programs well. But I am unable to get any responses to the inputs provided to FPGA. debug. If there are any tips, please share

Hello,

maybe you can join schematics of this board to your post. I think it should be helpful.

Best Regards