Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

FPGA board, Mobile device Interfacing

Status
Not open for further replies.
P

picko_again

Newbie level 4
Newbie level 4
Joined
Apr 16, 2007
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,330

I have a problem connecting a spartan 3 FPGA board with a mobile device through it's USB port...a spartan 3 starter kit has no USB port for communication so we need to use its RS232 port..and as the mobile device must communicate through USB so we need some kind of a converter in between...
please if anyone faced such a problem or have any idea how to do such communication please say..thanks in advance...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top