Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Four series 1V2 NiCd or NiMH cells needed for supplying 800mA for 90 minutes

Status
Not open for further replies.
T

treez

Guest
Newbie level 1
Hello,

I need the above batterys.....but digikey and mouser dont list batteries much at all, ...how can i decide the cheapest batteries capable of this?
 

AA rechargeables with 2.5 A-Hr capacity can be found in neighborhood stores. A package of four might cost you $12.

Look at the rating on AAA rechargeables too, in case they might be enough.

You're looking for 1.2 A-Hr capacity ( .8 A x 1.5 hrs.)

It might be less expensive from Ebay or mail order houses, as long as shipping costs are not too much.
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top