Jason_CVM
Newbie level 1
- Joined
- Dec 14, 2012
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,292
Hi everybody,
I searched almost a day on the internet to find what I'm looking for and I don't find anything that help, so I would really appreciate your help.
I'm using ORCAD Capture for making an arduino Shield schematics and exporting it to PCB editor, but I have some footprint issues. When I add headers to my schematic, it doesn't has any footprint name with it. I succeeded to put jumper2 and jumper3 for some headers, but I don't find footprint name for 2x18 header and 1x10 header. Futhermore, my header 8x1 have a 4x2 footprint when I put jumper8.
So where can I find the right footprint name for my headers?
I searched almost a day on the internet to find what I'm looking for and I don't find anything that help, so I would really appreciate your help.
I'm using ORCAD Capture for making an arduino Shield schematics and exporting it to PCB editor, but I have some footprint issues. When I add headers to my schematic, it doesn't has any footprint name with it. I succeeded to put jumper2 and jumper3 for some headers, but I don't find footprint name for 2x18 header and 1x10 header. Futhermore, my header 8x1 have a 4x2 footprint when I put jumper8.
So where can I find the right footprint name for my headers?