Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Food contamination detection using microwave imagging

Status
Not open for further replies.
A

anos_mas

Guest
Newbie level 1
Microwave imagging

Hi
can any body help me in this topic
(food contamination detection) by using microwave imagging
with my regards
 

Re: Microwave imagging

I can provide only some reference from the Wiley food Encyclopedia:

P.H.Heinemann et al.,"Machine Vision Inspection of Golden Delicious Apples,"Applied Engineering in Agriculture 11, 901-906 (1995).

M.J.Delwiche,S.Tang,and J.F.Thompson,Prune Defect Detection by Line-scan Imaging,Paper 88-3024,American Society of Agricultural Engineering,St.Joseph,Mich.,1988.

B.K.Miller and M.J.Delwiche,A Color Vision System for Peach Grading,Paper 88-6025,American Society of Agricultural Engineering,place of publication 1988.
 

Re: Microwave imagging

Thanks
where i can find these references
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top