Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Focusing of UWB radar signals for position of target

Status
Not open for further replies.

pramod.kilu

Newbie level 4
Newbie level 4
Joined
Mar 5, 2009
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,320
.i am doing my final year thesis on Focusing of UWB radar signals.
Development of focusing methods of UWB radar signals positioning of targets
The thesis should aim to develop methods for focusing of UWB radar signals with static antennas.

- - - Updated - - -

Time Reversal
with a single antenna set up. Thus, firstly send the signal from the transmitter,
secondly send the inverse received signal from the transmitter. This could
probably improve and focus the greatest target. This could easily be
tested in Simulink and it would be possible to implement in our system later on.
but i am new to simulink can any one help me how to start
 

first i should start working with m sequence generator using simulink .
thanks for your suggestion
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top