ediamondsrt
Junior Member level 3
- Joined
- May 3, 2007
- Messages
- 31
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 1,461
Hello,
I want to update firmware for my PIC24 chip, I know I will need some bootloader for that and I will work on that.
Still I have not finalized the interface that I may use for update. It might be USB or serial.
I was wondering if there is any application note from Microchip which can guide me to the steps that I have to take care and implement for the firmware upgrade?
Also how to setup the memory structure in such a way so my bootloader always be there even I do load new application code via PICKIT2.
I want to update firmware for my PIC24 chip, I know I will need some bootloader for that and I will work on that.
Still I have not finalized the interface that I may use for update. It might be USB or serial.
I was wondering if there is any application note from Microchip which can guide me to the steps that I have to take care and implement for the firmware upgrade?
Also how to setup the memory structure in such a way so my bootloader always be there even I do load new application code via PICKIT2.