May 11, 2015 #1 L limitless_21 Member level 2 Joined May 17, 2012 Messages 52 Helped 1 Reputation 2 Reaction score 2 Trophy points 1,288 Activity points 1,668 Hi All, I am stuck with a problem where i need a solution to find the nets between 2 points in a design. Eg. between FF1/Q --> FF2/D This is for the encounter tool - any command for this or a tcl script ? Please let me know. Thanks Limitless_21
Hi All, I am stuck with a problem where i need a solution to find the nets between 2 points in a design. Eg. between FF1/Q --> FF2/D This is for the encounter tool - any command for this or a tcl script ? Please let me know. Thanks Limitless_21
May 11, 2015 #2 K kenambo Full Member level 6 Joined Feb 26, 2012 Messages 393 Helped 52 Reputation 104 Reaction score 48 Trophy points 1,308 Location India Activity points 3,859 use report timing option It shows the net and arcs between the two points.. From that you get the nets between this reg2reg path. thanks
use report timing option It shows the net and arcs between the two points.. From that you get the nets between this reg2reg path. thanks